JMD Handy Baby II Key Programmer,How To Work?

JMD Handy Baby II is on the shelves of  OBD2eshop,Handy-Baby ii can be update free online. With JMD Handy Baby 2, you can copy 4D/46/48/G/ID48 96bit key chips, here post what function HANDY BABY II  can do, how to register and how to use it to copy chips(Take chip 46, 4D and 48 for example).

Here is the video shows what function it can achieve and how to use it:

 

Handy Baby 2 Functions List:

1.RD & CP: Identification chip /Edit Chip data / Deco chip / Copy chip
2.Chip-fun: Generate chip/Chip simulate/Chip transfer
3.Det-manu: Frequency test/ Data test/ signal detect
4.Remote: Remote renew/FIX CODE clone/Fixed code/JMD remote renew (JMD remote by JMD APP)
5.card-cp: Copy ID/IC card
6.Assistant: Copy Audi/VW 4th / Audi 5th/Audi ID8E/Assistant online(All key lost)/Assistant information
7.More-fun: Functional introduction/Simulate as transponder/ECO Mode
8.96bits-dec: Deco 96bits 48 and copy
9.Setup: Bluetooth/Voice/Volume/Brightness ersion/Function list/APP QR code
Handy Bay: Living for the locksmith, Saving for the locksmith

JMD HANDY BABY II smart key unlock

How to register JMD Handy-Baby II, Client v4.5.3

 

Handy Baby II Key Programmer Operation steps:

Turn on: long press the “On” button.
Turn off: long press the “On / off” button or “On / off” and “OK” button
Steps to operate: follow the tips on the screen, put the original key into the coil, press “OK” to recognize.

Take chip 46, 4D and 48 for example. 

Steps to copy 46: 

1. Press “OK” to decode
2. Make antenna close to

coil

3. Insert and turn the key (collection)
4. Put original key into

coil

to decode
5. Put new key into

coil

to copy

Steps to copy 4D: 

Press “OK” to decode, then put new key into

coil

to copy.

Steps to copy 48:

Press “OK” to decode, then put new key into

coil

to copy.

Handy Baby Key Copy Programmer Initialize:

Please use with caution: only available for JMD46 / 4D and revisable UID48 chip. The data won’t be restored after the chip erased.
Enter program, select the chip type, press “OK” to restore to factory settings.

Handy Baby Key Copy Programmer Test Frequency:

Steps to test the key remote frequency: Enter program, make key close to the surface of left button,

meanwhile

press

remote

button, then the frequency will display.

Handy Baby Key Copy Programmer Data read and write:

1) Read and write 46 chip 

1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank.
2. Select chip mode: move

mouse

cursor to “Mode”, I.E “Plaintext mode”, press “OK”, the fonts turn black from white to indicate the selection mode, press “Up” and “Down” to select the Plaintext mode or password mode.
3. Enter password: move

cursor

to the password box under the mode, press “OK” to proceed, press “Up” and “Down” to select the data (0`F), press “Left” and “Right” to transfer password.
4. After finish press “OK

“to

exit, then move

cursor

to “Read all” to read out data.
5. Read all: read out all data for 46 chip and display the status of locked or unlocked.
6. Write: write the corresponding data; make sure 46 unlocked before writing data.
7. Enter data: the way to enter data is as the same as to enter

password

.

2) Read and write 48 chip 

1. Read: read out 48 chip UID, user 1 and user 2 data, and display 48 chip type as well as the status of locked or unlocked.
2. Write: write the corresponding area data; make sure 48 unlocked before writing data.
3. Enter data: move

cursor

to the data input box, press “OK” to proceed, press “Up” and “Down” to select the data (0`F), press “Left” and “Right” to transfer password. After finish press “OK” button to exit, move

cursor

to “Write” to write data.
4. Unlock:  if the chip is locked, then it needs to be unlocked before writing into data.
5. Steps: when the chip is read out locked, please enter PIN code which is the code of 48 chip, move

cursor

to “Unlock”, press “OK” to unlock.

3) Read and write 4D chip 

1. Read: read out 4D chip password, recognition and ID data, also display their status of unlocked or locked.
2. Enter data: move

cursor

to the data input box, press “OK” button to proceed, press “Up” and “Down” to select the data (0`F), press “Left” and “Right” to transfer password. After finish press “OK” to exit, move

cursor

to “Write” to write data.
3. Write: write the corresponding area data; make sure 4D unlocked before writing data.
4. Lock: lock the corresponding area, note: it is unable to unlock after locked.
5. Car ignition check: enter the verification code, then it will return

corresponding

signature.

4. Other chips

Able to recognize chip 13、40/41/42/44/45、4C/46/48、4D61/62/63/67/68/68﹢/71
Able to use T5575、em4305 and the compatible cards to copy 13 chip.

5. Generate chip

Chip 67 and 68: need the unlocked 4D chip to generate.
Specialized 48 chip: able to generate chip for only Seattle TA, VW TA, Skoda TA, Audi TA, SEAT TP, VW TP, Skoda TP, Audi TP

and

Jetta

Source:http://www.eobdshop.com/wholesale/handy-baby-ii-key-programmer.html